B.1. Security settings

Submenu containing most important security settings, like passwords.

1. Root password [$1$rUj/KWS1$v3FZcBP.6HiN4f5PaATMq1]

   Password of "root" user, shown in encrypted form. The default is "buffy". To change the password, clear the field, enter a new password and click Save. Saving an empty field keeps the old password. Please note that the new password is shown in plain text only right after you have saved it. Later it is only shown encrypted, and there is no way to decrypt it. You must either remember it or change it again to something you do remember.

2. iWRAP password [buffy]

   The password required to be entered before any commands when communicating with iWRAP (the Bluetooth server). The default is "buffy". To change the password, clear the field, enter a new password and click Save. Saving an empty field keeps the old password. Please note that the new password is shown in plain text only right after you have saved it. Later it is only shown encrypted, and there is no way to decrypt it. You must either remember it or change it again to something you do remember. Use "-" to disable iWRAP password.

3. Do not require iWRAP password from local clients [Yes]

   Ask iWRAP password only from remote clients, not from local (127.0.0.1).

4. Bluetooth PIN code []

   This PIN code used when establishing connections. Up to 16 characters are significant. If there is no default PIN code set, Access Server does not require a PIN code when establishing connections. However, if there is no default PIN code set, but the other device requests a PIN code, "1234" is replied.

5. wpkgd autoinstall password []

   This is optional password to authenticate wpk autoinstall packets (wpk packets sent to the autoinstall directory, /tmp/obex by default). The password is shown encrypted here, if set. By default, it is not set. To change the password, clear the field, enter a new password and click Save. Please note that the new password is shown in plain text only right after you have saved it. Later it is only shown encrypted, and there is no way to decrypt it. You must either remember it or change it again to something you do remember. Use "-" do disable the password. The password must match the authentication parameter in the "wpkg.pif" file in the wpk packet. Otherwise the packet is not processed. Syntax in the "wpkg.pif" file: %wpkg-auth: auth

6. wpkgd hotplug password []

   This is optional password to authenticate wpk installation packets automatically run from USB memory dongles or Compact Flash memory cards. The password is shown encrypted here, if set. By default, it is not set. To change the password, clear the field, enter a new password and click Save. Please note that the new password is shown in plain text only right after you have saved it. Later it is only shown encrypted, and there is no way to decrypt it. You must either remember it or change it again to something you do remember. Use "-" to disable the password. The password must match the authentication parameter in the "wpkg.pif" file in the wpk packet. Otherwise the packet is not processed. Syntax in the "wpkg.pif" file: %wpkg-auth: auth

7. Root user password for FTP [buffy]

   Password of the "root" user for FTP connections.

8. Allow anonymous FTP login [Yes]

   Whether "anonymous" FTP login is allowed or not.

9. WWW passwords [/etc/httpd.conf]

   Access to WWW pages served by Access Server can be restricted using the configuration file "httpd.conf", editable from here. The file consists of lines in format "/dir:username:password". This specifies that to view the WWW page at address "http://as-ip/dir", you must enter username "username" and password "password". More than one username can be defined for the same "/dir" by adding multiple lines. By default, this file specifies that only user "root" with password "buffy" is allowed to access the WWW Setup.

B.2. Generic settings

Submenu containing generic settings.

1. Root password [$1$rUj/KWS1$v3FZcBP.6HiN4f5PaATMq1]

   Password of "root" user, shown in encrypted form. The default is "buffy". To change the password, clear the field, enter a new password and click Save. Saving an empty field keeps the old password. Please note that the new password is shown in plain text only right after you have saved it. Later it is only shown encrypted, and there is no way to decrypt it. You must either remember it or change it again to something you do remember.

2. Use local syslog service [Yes]

   This option determines whether the System Logger (syslogd) logs locally to /var/log/messages or not. Set this to No if you want to log to a remote syslog server.

3. IP address of the remote syslog server [192.168.42.1]

   The IP address of the device in the network to which the System Logger should log to. The remote device must be configured to accept syslogd connections from this Access Server. See the system logger documentation on the remote device for more information on how to configure that.

B.3. Network settings

Submenu containing network settings.

1. Hostname of the unit [wrap]

   The hostname of Access Server. Local applications will see this name. This name may be changed by dynamic network configuration.

2. Domain of the unit [localdomain]

   The domain name of Access Server. Local applications will see this name. This name may be changed by dynamic network configuration.

3. Enable Ethernet cable interface [Yes]

   Set this option to Yes if you want to have the Ethernet cable interface enabled. If you don't use this interface, you may disable it to slightly increase security and system boot speed.

4. Enable Wi-Fi interface [Yes]

   Set this option to Yes if you want to have the Wi-Fi interface enabled (you can use the Wi-Fi interface with a supported Compact Flash Wi-Fi card or USB Wi-Fi dongle). If you don't use this interface, you may disable it to slightly increase security and system boot speed.

5. Enable GPRS interface [No]

   Set this option to Yes if you want to have the GPRS interface enabled. To use the interface, a supported Compact Flash GPRS card or a serial GPRS modem must be attached to Access Server.

6. Time server (rdate) []

   Hostname or IP address of the time server to be connected at system boot to retrieve correct time using the Time Protocol (RFC 868). NTP client is running by default, so rdate should not be needed at all.

7. Zeroconf interface [nap]

   Defines the interface in which Zeroconf is running. Possible interface names are "nap", "gn" and "none".

Default interface settings. By default, Ethernet and Bluetooth
PAN-NAP interfaces are assigned to this interface.

Ethernet cable settings.

Wi-Fi settings.

GPRS settings.

B.4. Applications

Submenu containing settings of various applications.

1. Default startup applications []

   Change which applications are to be started at startup and which don't.

Submenu containing settings for wpkgd application.

Submenu containing settings for FTP server application.

Submenu containing settings for ObexSender application.

This link will delete the current log file after confirmation.

Submenu containing settings for SMS gateway application.

B.5. Bluetooth settings

Submenu containing all Bluetooth related settings.

1. iWRAP password [buffy]

   The password required to be entered before any commands when communicating with iWRAP (the Bluetooth server). The default is "buffy". To change the password, clear the field, enter a new password and click Save. Saving an empty field keeps the old password. Please note that the new password is shown in plain text only right after you have saved it. Later it is only shown encrypted, and there is no way to decrypt it. You must either remember it or change it again to something you do remember. Use "-" to disable iWRAP password.

2. Do not require iWRAP password from local clients [Yes]

   Ask iWRAP password only from remote clients, not from local (127.0.0.1).

3. Friendly name [W$S_$p]

   The name shown when this device is found when inquired about by other Bluetooth devices. Following meta tags are available: $S : Hardware serial number, all ten digits $s : Hardware serial number, last three digits $P : Server port $p : Server port, last digit $H : Fully Qualified Domain Name (FQDN) $h : hostname $$ : $ For example, "Server_$p" would set the Bluetooth friendly name as "Server_1" for 1st baseband, "Server_2" for 2nd baseband and "Server_3" for 3rd baseband.

4. Connectable and discoverable mode [3]

   This setting specifies whether this device is connectable and/or discoverable or not by other Bluetooth devices. When a device is connectable, other Bluetooth devices can make a Bluetooth connection to it. Before making a connection, the calling device must know the Bluetooth address of the device it is connecting to. The Bluetooth addresses can be found by making an inquiry. When a device is discoverable, it shows up in inquiries. Possible values for all combinations of these settings are: 0 : Not connectable, not discoverable 1 : Not connectable, discoverable 2 : Connectable, not discoverable 3 : Connectable and discoverable (default)

5. Master/slave role switch policy [1]

   This setting specifies how local Bluetooth device should decide it's role. When a Bluetooth device calls another Bluetooth device, it is master by default and the answering device is slave. When the connection is being built, a role switch can be made. Normally, access point devices need to be the master, and therefore they require a master-slave switch when a new device is connecting. This is also how Access Server is configured by default. Otherwise Access server couldn't host the maximum number of slaves (7). Other possible combinations are: 0 : Allow switch when calling, don't request it when answering 1 : Allow switch when calling, request it when answering (default) 2 : Don't allow switch when calling, request it when answering If you have problems with connecting to Access Server, it might be because your client device does not support the master/slave switch. In this case, set this setting to 0.

6. Default PIN code []

   This PIN code used when establishing connections. Up to 16 characters are significant. If there is no default PIN code set, Access Server does not require a PIN code when establishing connections. However, if there is no default PIN code set, but the other device requests a PIN code, "1234" is replied.

7. Power save mode and parameters [4]

   The power save mode used by default for all connections. Possible settings are: 0 : Active. 1 : Park: Round-robin. 2 : Park: Idle. 3 : Sniff: All 4 : Sniff: Idle (default). "Active" means that no power saving is in use. "Sniff: All" means that the connections are kept in sniff mode always. "Sniff: Idle" means that a connection is switched to sniff mode after it has not transmitted data for some time (2 seconds by default). When data transmission resumes, switch to active mode is made. Park modes are generally not useful. See User's and Developer's Guide and Bluetooth specification for more information.

8. Use literal replies in SDP [Yes]

   If enabled, some SDP result codes will have literal values instead of numeric values.

9. Optional command line parameters []

   Optional extra command line startup parameters for the iWRAP servers.

10. Edit startup script [/etc/bluetooth.conf]

    Opens iWRAP configuration file (/etc/bluetooth.conf) for editing. You can append extra iWRAP commands to that file. iWRAP servers process the file each time they start. See the User's and Developer's Guide for iWRAP command reference.

Submenu for the settings of all supported Bluetooth profiles.

Submenu containing LAN Access Profile settings.

Submenu containing Personal Area Network User Profile settings.

Submenu containing Personal Area Network Generic Networking Profile
settings.

Submenu containing Personal Area Network Network Access Point Profile
settings.

Submenu containing the Bluetooth Serial Port Profile settings.
The profile itself is enabled and disabled by switching "serialport"
application "on" or "off" from the menu:
Setup -> Applications -> Default bootup applications.

This submenu contains Bluetooth Object Push Profile settings.

This submenu contains Bluetooth File Transfer Profile settings.

B.6. Advanced settings

Submenu containing advanced settings of Access Server.

1. System startup script [/etc/rc.d/rc.local]

   This is the last initialization script executed at system startup. By default, the script /etc/rc.d/rc.local just turns off all LEDs to indicate the startup has finished. If you want to initialize something automatically at every boot, or start up your own applications, you should add the required commands to this file. Remember to start your programs to the background. Example: /usr/local/bin/myapp & If you do not start the programs to the backgroud, you will not able to access the management console using a serial cable.

2. Default user profile [/etc/profile]

   Edit the file containing the default user profile settings.

3. WWW passwords [/etc/httpd.conf]

   Access to WWW pages served by Access Server can be restricted using the configuration file "httpd.conf", editable from here. The file consists of lines in format "/dir:username:password". This specifies that to view the WWW page at address "http://as-ip/dir", you must enter username "username" and password "password". More than one username can be defined for the same "/dir" by adding multiple lines. By default, this file specifies that only user "root" with password "buffy" is allowed to access the WWW Setup.

4. Setup access [/etc/setup.conf]

   The "/etc/setup.conf" file can be used to give different access rights to different users of the WWW Setup. The file consist of lines in following format: example.tag +user1 +user2 -user3 -user4 This will allow (+) access to tag "example.tag" for "user1" and "user2" and denies (-) access from "user3" and "user4". You can find the tags from the output of Setup -> Advanced -> System Information -> Collect info for support request For example, the tag of this setting is advanced.setupconf. If you have created another user "guest" in /etc/httpd.conf that can access "/setup", you can deny that user from changing the Setup access settings with following line in this file: advanced.setupconf -guest

5. Edit other configuration files []

   From this menu you can edit any files located in Access Server file system. You can for example create "/var/spool/cron/crontabs/root" file for configuring the cron daemon.

6. Browse files []

   Browse files stored in Access Server.

7. Find other Access Servers [/usr/sbin/finder]

   Find other Access Servers.

8. Inquiry for Bluetooth devices [/usr/bin/btcli inquiry]

   Inquiry for other Bluetooth devices.

9. Upload a software update [/tmp/obex]

   Upload a software update file (*.wpk). Access Server supports a special management packet format (wpk), which can be used to update Access Server software components or to install custom software and configuration files. Please consult User's and Developer's Guide for more information.

This submenu contains tools to retrieve system status information.

Reboot Access Server. Confirmation will be asked.

B.7. Summary of Setup Options

Security settings
    Root password                         [$1$rUj/KWS1$v3FZcBP.6HiN4f5PaATMq1]
    iWRAP password                        [buffy]
    Do not require iWRAP password from local clients          [Yes]
    Bluetooth PIN code                    []
    wpkgd autoinstall password            []
    wpkgd hotplug password                []
    Root user password for FTP            [buffy]
    Allow anonymous FTP login             [Yes]
    WWW passwords                         [/etc/httpd.conf]
Generic settings
    Root password                         [$1$rUj/KWS1$v3FZcBP.6HiN4f5PaATMq1]
    Use local syslog service              [Yes]
    IP address of the remote syslog server          [192.168.42.1]
Network settings
    Hostname of the unit                  [wrap]
    Domain of the unit                    [localdomain]
    Default interface settings
        Use dynamic network configuration           [Yes]
        IP address                        [192.168.42.3]
        Subnet mask                       [255.255.255.0]
        IP address of the default gateway           [192.168.42.254]
        List of name server IPs           [192.168.42.1 192.168.42.2]
    Enable Ethernet cable interface       [Yes]
    Ethernet cable settings
        Assign to default interface       [Yes]
        Use dynamic network configuration           [Yes]
        IP address                        [192.168.43.3]
        Subnet mask                       [255.255.255.0]
    Enable Wi-Fi interface                [Yes]
    Wi-Fi settings
        Act as a Wi-Fi Access Point       [No]
        ESSID                             []
        Nickname                          []
        WEP encryption key                []
        Extra commands for Access Point mode        [/etc/sysconfig/ifup-wlan0]
        Assign to default interface       [No]
        Use dynamic network configuration           [Yes]
        IP address                        [192.168.44.3]
        Subnet mask                       [255.255.255.0]
    Enable GPRS interface                 [No]
    GPRS settings
        Dial on demand                    [Yes]
        SIM card PIN code                 []
        Username                          [blue]
        Password                          [giga]
        Internet APN                      [internet]
        Extra parameters for pppd         []
    Time server (rdate)                   []
    Zeroconf interface                    [nap]
Applications
    Default startup applications          []
    wpkgd settings
        wpkgd's autoinstall directory     [/tmp/obex]
        Password for autoinstall packages           []
        Delete processed autoinstall packages       [Yes]
        Process hotplug packages          [Yes]
        Password for hotplug packages     []
        Delete processed hotplug packages           [No]
        Extra parameters for wpkgd        []
    FTP server settings
        Root user password                [buffy]
        Root user directory               [/]
        Root user instances               [5]
        Allow anonymous login             [Yes]
        Anonymous user password           [*]
        Anonymous user directory          [/tmp/obex]
        Anonymous user instances          [5]
        Allow anonymous user to do everything       [No]
        Allow anonymous user to download  [Yes]
        Allow anonymous user to upload    [No]
        Allow anonymous user to overwrite           [No]
        Allow anonymous user to multiple login      [No]
        Allow anonymous user to erase     [No]
        Edit configuration file           [/etc/ftpd.conf]
    ObexSender settings
        Bluetooth friendly name           [W$S_$p]
        Delay between inquiries           [10]
        Delay between reply scans         [10]
        If previous was ok, timeout before sending again      [36000]
        If previous was reject, timeout before trying again   [86400]
        Delay between retrying call       [120]
        Delay after scanning              [5]
        Delay between multiple files      [40]
        Minimum RSSI value before sending           [-65]
        Logfile name                      [-]
        Log prefix                        [-]
        If sending was failure, log it too          [Yes]
        Register to watchdog daemon       [Yes]
        iWRAP password                    [-]
        Edit configuration file           [/etc/obexsender.conf]
        Upload a new file                 [/usr/local/obexsender]
        List files                        [/usr/local/obexsender]
        View log                          [-]
        Delete log (confirm)
            Delete log now!               [/bin/true]
    SMS gateway settings
        Modem device                      [/dev/ttyS0]
        Log file name                     [-]
        SMSC number                       [+358405202000]
        Edit configuration file           [/etc/smsgw.conf]
Bluetooth settings
    iWRAP password                        [buffy]
    Do not require iWRAP password from local clients          [Yes]
    Friendly name                         [W$S_$p]
    Connectable and discoverable mode     [3]
    Master/slave role switch policy       [1]
    Default PIN code                      []
    Power save mode and parameters        [4]
    Use literal replies in SDP            [Yes]
    Optional command line parameters      []
    Edit startup script                   [/etc/bluetooth.conf]
    Bluetooth profiles
        Enable lan access profile         [No]
        Lan access profile settings
            Login name and password       []
            Service name (shown in SDP)   [Lan Access]
            Defaultroute modification policy        [0]
            First IP for LAP clients      [192.168.160.0]
        Enable PAN user profile           [No]
        PAN user profile settings
            Service name (shown in SDP)   [PAN User]
            Enable zeroconf when calling  [No]
            Enable zeroconf when answering          [No]
        Enable PAN generic networking profile       [No]
        PAN generic networking profile settings
            Service name (shown in SDP)   [Generic Networking]
            Use dynamic network configuration for local IP address      [No]
            Local GN interface IP address           [192.168.161.1]
            Local GN interface subnet mask          [255.255.255.0]
            Start DHCP server for remote users      [Yes]
            First IP for lease block      [192.168.161.2]
            Last IP for lease block       [192.168.161.254]
            Subnet of lease block         [255.255.255.0]
            Lease time                    [86400]
        Enable PAN network access point profile     [No]
        PAN network access point profile settings
            Service name (shown in SDP)   [Network Access]
        Serial port profile settings
            Act as the calling device     [No]
            BPS rate                      [115200]
            Data bits                     [8]
            Parity                        [0]
            Stop bits                     [1]
            Hardware flow control (RTS/CTS)         [Yes]
            Software flow control (XON/XOFF)        [No]
            Bluetooth address of the remote device  [00:07:80:80:bf:01]
            Service channel               [2]
            Service name (shown in SDP)   [Serial Port]
            Optional command line parameters        []
        Enable object push profile        [Yes]
        Object push profile settings
            Service name (shown in SDP)   [Object Push]
        Enable file transfer profile      [Yes]
        File tranfer profile settings
            Service name (shown in SDP)   [File Transfer]
Advanced settings
    System startup script                 [/etc/rc.d/rc.local]
    Default user profile                  [/etc/profile]
    WWW passwords                         [/etc/httpd.conf]
    Setup access                          [/etc/setup.conf]
    Edit other configuration files        []
    Browse files                          []
    Find other Access Servers             [/usr/sbin/finder]
    Inquiry for Bluetooth devices         [/usr/bin/btcli inquiry]
    Upload a software update              [/tmp/obex]
    System information
        Hardware information
        List installed software components          [/usr/bin/dpkg -l]
        List running processes            [/bin/ps ww]
        List memory status                [/usr/bin/free]
        List free disk space              [/bin/df -h]
        Show system log file              [/var/log/messages]
        Show system boot log file         [/var/log/dmesg]
        Collect info for support request  [/usr/sbin/supportinfo]
    Reboot system (confirm)
        Reboot now!                       [/sbin/reboot]