SDPQUERY

Description

The SDPQUERY command is used to send a Service Search Attribute Request to a connected SDP server, identified with link_id. The command supports requesting for one attribute value (specified with the attribute parameter, 4 hex digits, or a keyword) in all service entries containing one UUID (specified with the uuid parameter, 4 hex digits, or a keyword), but several requests can be sent during the same SDP connection. However, you must wait for the reply to the previous reply before issuing new SDPQUERY command.

Reply

SDPQUERY link_id info

Example

          READY.
          CALL 00:07:80:80:bf:01 SDP
          CALL 0
          RINGING 0
          CONNECT 0 SDP
          SDPQUERY 0 LAN DESCLIST
          SDPQUERY 0 < < I 0004 < < U 0100 > < U 0003 I 04 > > > >
          SDPQUERY 0 1102 0100
          SDPQUERY 0 < < I 0100 S "Lan Access using PPP" > >
          CLOSE 0
          NO CARRIER 0 ERROR 000