|
Key features: - Bluetooth� Class 2
Integrated chip antenna Enhanced Data Rates (EDR) with data throughput up to 2-3Mbps Support for Adaptive Frequency Hopping (AFH) and 802.11 co-existence USB version 2.0 UART with bypass mode 8Mb of flash memory - Supported Bluetooth profiles: SPP, DUN, OBEX, Hands Free Profile, Audio Gateway and HCI*
- Support for custom applications
- Industrial temperature range from -40C to +85C
RoHS compliant Pin-to-pin compatible with Bluegiga WT11 module Simple iWRAP� firmware for controlling Bluetooth� wireless technology Fully qualified end product with Bluetooth� 2.0+EDR, CE and FCC
| |
Description: WT12 is a next-generation, class 2, Bluetooth� 2.0+EDR (Enhanced Data Rate) module. It introduces three times faster data rates compared to existing Bluetooth� 1.2 modules even with lower power consumption! WT12 is highly integrated and sophisticated Bluetooth� module, containing all the necessary elements from Bluetooth� radio to antenna and a fully implemented protocol stack. Therefore WT12 provides an ideal solution for developers who want to integrate Bluetooth� wireless technology in to their design with limited knowledge of Bluetooth� and RF technologies. WT12 module combined with Bluegiga's complete development, testing and verification service offering and excellent developer support, OEMs and designers ensure that their products reach the market rapidly and cost-effectively in relation to time and resources. Bluegiga has in-house knowledge of both software and hardware offering customers a single point of contact to all Bluetooth� related issues. Software: By default WT12 module is equipped with powerful and easy-to-use iWRAP firmware. iWRAP enables users to access Bluetooth functionality with simple ASCII commands delivered to the module over serial interface - it's just like a Bluetooth modem. Entering the world of wireless Bluetooth� technology could not be easier! With iWRAP software you have several implementation options: - iWRAP can be configured to operate autonomously - just like a Bluetooth cable replacer
- To create sophisticated applications - a host system can be used to control iWRAP with ASCII commands
- The GPIO interface in WT12 module can be used to connect host and iWRAP
Besides the iWRAP firmware Bluegiga also offers several other firmware options for WT12 module. Standard Host Command Interface (HCI) firmware is supported and an ideal solution for systems where the host system is capable running the entire Bluetooth� stack and profiles and WT12 is utilized as low radio over UART or USB interface. Bluegiga also provides custom firmware services, eliminating the need for customers to perform firmware or parameters installation on production line, reducing significantly the production cost, time and complexity. Applications: - Point-of-Sales systems
- Bar code and RFID scanners
- Medical measurement and data transfer systems
- Automotive inspection and measurement systems
- Telemetry and machine-to-machine interfaces
- PDAs and other portable terminals
- Industrial PCs and Laptops
Documentation:  WT12 Product Brief
WT12 Data Sheet
iWRAP 2.1.0 User Guide
Compare WRAP THOR modules
WT12 RoHS Statement
Qualified Product Information
WT12-A RoHS Certificate
Evaluation: WT12 Evaluation Kit Product codes: Product code | Description | Firmware | WT12-A-AI | WT12 module with internal antenna | iWRAP | WT12-A-HCI | WT12 module with internal antenna | HCI | | WT12-A-C | WT12 module with internal antenna | Custom** |
Lead times: Sample orders 1-2 weeks
Volume orders 6-10 weeks More information: More information about WT12 is available in Tech-forum.
Sales inquiries: [email protected]
Technical information: [email protected]
Orders: [email protected] *) Limited support for OBEX and DUN.
**) Custom firmware orders require properly filled custom firmware order form.
Contact Bluegiga Technologies for more information. |
5.10.2006
WT12 Bluetooth� Module
